Warning message

Missing class handler for field field_created. Field name: revision_created

GP-7SRC Technology

GP-7SRC

GP-7 Fit

The new GP-7SRC is a stunning example of Arai’s vision and technological mastery engineered into a functional, real-world piece of safety equipment. It begins with a startling advancement: a proprietary Carbon Fiber (CF) weave that combines CF’s existing benefits of high strength and extreme light weight with a major added benefit that standard CF does not possess: flexibility. (Standard CF tends to splinter or shatter instead of flex on impact.) The result is a helmet ready for the unparalleled demands and requirements of high end closed cockpit racing. One whose remaining list of features and advances is impressive because, for this helmet and its prospective user, it simply has to be. The GP-7SRC meets or exceeds the FIA 8860-2018 Standard.

IntermediateOval

GP-7SRC

POSITIVE SHIELD LATCH

Positive latch mechanism provides Solid shield latching, while allowing normal operation of the shield. Designed to be an integral component of the shield system and function, not just an add-on afterthought. The simplicity of the function masks the complexity of the design.

NEW SHIELD PIVOT HARDWARE

New shield pivot hardware, with new one-piece track slider and screw hardware that is adjusted with a T-20 torx screw. This allows the pivot point of the shield opening to moved downwards on the shell to give the shell more area for Glacning Off Shield.  

NEW FCS CHEEK PADS

For the GP-7SRC the cheek pads are scuplted to grip the lower jaw of the driver more securely.  This feature was highlighted by our F1 drivers as they feel the helmet encapsulates thier head better and also reduces outside wind noise. 

VENTILATION

Three large, closeable, intake vents combined with larger 10mm holes and two aditional exhaust vents in the center of the helmet greatly increase air flow.   While a redesigned exhaust cowling improves aerodymaics and hot air escaping the helmet.  Note: The GP-7SRC comes with all vents unattached so you can customize the vent configuration depening on your specifics needs. 

M6 ANCHOR TYPE

Integrated seats to accommodate a variety of Head and Neck Restraint devices. Pre-Installed M6 threaded washer/nut, with 6mm threads, to accept a variety of anchors systems for variety of Head and Neck Restraint devices and make installation much easier for people not familiar with such installations. Flat surface area around the mounting nut to allow the anchor post base to rest flush with the helmet surface around the entire perimeter of the anchor base.The GP-7SRC come standard with the HANS Clips installed.

Racing Carbon Shell

Proprietary Carbon Fiber material and weave provide an extremely strong, yet flexible material, which helps impact energy management. Multiple reinforcing materials are used to improve performance and keep weight and size to a minimum.

E-JECT READY CROWN PAD

Pre-cut pocket, under crown pad, can be easily removed to accommodate optional E-Ject(R) system.

DRINK SYSTEM COMPATIBILITY

For the GP-7 the chin liner is now more easily removed to install a drink tube into the chin liner.  The chin liner comes standard with 4 different drink hose placements.